Relative Measurements from 0.1 to 30 THz Broadband, room temperature operation, easier to use and less expensive than a Golay cell
Wide Dynamic Range from nW to mW With state of the art pyroelectric sensors, measure down to 50 nW with 1 nW resolution
Use with T-Rad THz Module or T-Rad-Analog Analog Power Module Each head can be connected to an oscilloscope using the analog power module (T-Rad-Analog) or directly to a PC with the digital power module (T-Rad)
Several Sensor Sizes Available Choice of 5 mm and 9 mm diameter
Calibrated at 0.63 µm THZ-B detectors are calibrated at a single wavelength (0.63 µm) and include typical wavelength correction data from 0.25 to 440 µm. They are used for relative measurements outside that range
SDC-500 Optical Chopper All THZ-B detectors require the use of an optical chopper, like our SDC-500, to sync the signal at either 5 Hz (DA models) or 25 Hz (DZ models)
User-Friendly Software with Many Features (When used with T-Rad-USB)
Strip Chart, Statistics and Tuning Needle displays
Features
High Density Absorber The HD absorber is the strongest on the market for use at high powers, presenting both high average power handling and high power [...]
Customizable Harmonics Generator
for PHAROS, CARBIDE or FLINT.
FEATURES
515 nm, 343 nm and 257 nm
Easy switching between active harmonics
Simultaneus outputs [...]
DLB
Achromatic doublets are cemented achromats made of two different lenses (Low dispersion positive from crown glass and high dispersion negative from flint [...]
Home
